Goodman 3 Ton 17.2 SEER2 80000 BTU 96% Two Stage Variable Speed Gas Hybrid Heat Pump Dual System Horizontal
-
Condenser
1 × Goodman 3 Ton 17.2 SEER2 Premium Series Two Stage Heat Pump Condenser - GSZC703610
$4,025.00
$4,025.00
-
Furnace
1 × Goodman 80000 BTU 96% Variable Speed Gas Furnace Upflow/Horizontal Cabinet C - GMVC960804CN
$3,015.00
$3,015.00
-
Evaporator Coil
1 × Goodman 3 Ton Evaporator Coil with TXV Built in Horizontal 21" - CHPTA3630C4
$1,077.00
$1,077.00
-
0% Interest — for orders over $3000
-
No Credit Needed — Offered at checkout
-
7 night Luxury Resort Stay — For orders over $3000
What's Included
What's Included
Goodman 3 Ton 17.2 SEER2 Premium Series Two Stage Heat Pump Condenser
Model Number
GSZC703610
Dimensions
35-1/2" W x 35-1/2" D x 35-3/4" H
Documents
Warranty
Unit: 10 years | Compressor: Lifetime
Goodman 80000 BTU 96% Variable Speed Gas Furnace Upflow/Horizontal Cabinet C
Model Number
GMVC960804CN
Dimensions
21" W x 28-7/8" D x 34-1/2" H
Documents
Limited Warranty
Heat Exchanger: Limited Lifetime | Unit Replacement: 10 years | Parts: 10 years
Goodman 3 Ton Evaporator Coil with TXV Built in Horizontal 21"
Model Number
CHPTA3630C4
Dimensions
30" W x 21" D x 21" H
Documents
Limited Warranty
10 years
AHRI Number
211641816
Outdoor Unit Details
Outdoor Unit Details
GSZC7 Condenser
Standard Features
- Two-Stage Copeland® UltraTech scroll compressor
- High-density foam compressor sound blanket
- Integrated communicating ComfortBridgeTM technology
- Commissioning and diagnostics via indoor board Blue-tooth with the CoolCloudTM phone and tablet application
- ComfortAlertTM built in diagnostics
- Copper tube/enhanced aluminum fin coil- 5mm on 2.0-3.0T
- Efficient, two-speed ECM condenser fan motor
- Simple low-voltage wiring to out-door unit in communicating mode
- Diagnostic indicator lights and storage of six fault codes
- Color-coded terminal strip for non-communicating set-up
- High- and low-pressure switches
- Time-delay technology with short-cycle protection to ensure quiet, reliable defrost
- Factory-installed bi-flow liquid-line filter drier
- Factory-installed suction-line accumulator
- Factory-installed compressor crankcase heater
- Factory-installed high-capacity muffler
- Factory-installed coil and ambient temperature sensors
- AHRI Certified; ETL Listed
Cabinet Features
- Grille-style sound control top design
- Custom Nickel Gray powder-paint finish
- 500-hour salt-spray tested
- Wire fan discharge grille
- Steel louver coil guard
- Single panel access to controls
- with space provided for field-installed accessories
- Sweat connection service valves with easy access to gauge ports
- When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
Indoor Unit Details
Indoor Unit Details
GMVC96 Furnace
Standard Features
- Integrated communicating ComfortBridge™ Technology
- Commissioning and diagnostics via on board Bluetooth with the CoolCloud phone and tablet application
- Heavy-duty aluminized-steel tubular heat exchanger
- Stainless-steel secondary heat exchanger
- Two-stage gas valve provides quiet, economical heating
- Durable Silicon Nitride igniter
- Quiet two-speed induced draft blower
- Compatible with any single-stage thermostat
- Self-diagnostic control board with constant memory fault code history output to a triple 7-segment display
- Color-coded low-voltage terminals with provisions for electronic air cleaner
- Efficient and quiet variable-speed airflow system gently ramps up or down according to heating or cooling demand
- Multiple continuous fan speed options offer quiet air circulation
- Auto-Comfort and enhanced dehumidification modes available
- All models comply with California 40 ng/J Low NOx emissions standard
- Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD) on or after October 1, 2019.
Cabinet Features
- Designed for multi-position installation — upflow, horizontal left or right
- Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
- Easy to install top venting with optional side venting
- Convenient left or right connection for gas and electrical service
- Cabinet air leakage (QLeak)
- Heavy-gauge steel cabinet with durable baked-enamel finish
- Fully insulated heat exchanger and blower section
- Airtight solid bottom or side-return with easy-cut tabs for effortless removal in bottom air-inlet applications
CHPTA Indoor Coil
Standard Features
- All-Aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT, CAPTA, CHPT, CHPTA models feature factory-installed thermal expansion valves for cooling and heat pump applications
- CAPF, CAPFA, CAUF, CAUFA, CHPF, CSCF models feature a check flowrator for cooling and heat pump applications
- Vertical and horizontal models available
- 21” depth for easier attic access
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Galvanized,leather grain-embossed finish
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- DecaBDE-free thermoplastic drain pan with secondary drain connections
- UV-resistant drain pan
- AHRI Certified; ETL Listed
Shipping & Returns
Shipping & Returns
Fast nationwide fulfillment from the USA. Free shipping on qualifying orders over $1,500. See our shipping and returns policy for full details.